Operation - Promowide SP1290 User Manual

HEADPHONE RECEIVER
1. Open the battery compartment cover on the right side of the headphone.
2. Insert 2pcs of AAA size rechargeable batteries (supplied in the package) by
matching the + and – on the battery to the diagram inside the battery
compartment.
3. Close the battery compartment by sliding the battery compartment cover back
into place.

OPERATION

Transmitter
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with. The red LED on the transmitter will light up.
2. Select the channel 1 or 2 of the transmitter.
Speakers
1. Turn on the ON/OFF button on the speakers. Press the "AUTO-SCAN" button to
get the best tuning reception in the speakers. When the button is pressed,
frequency tuning starts automatically and it stops when a signal is detected.
2. Volume can be adjusted up by tuning the volume knob on the right sides of the
speakers to the desired listening level.
3. Whenever you find frequency jam, move your channel switch from one channel
to the other channel (there are two channels for selection) on the transmitter,
and then press the "AUTO-SCAN" button on the speakers again.
4. Using the Normal/Boost Bass control to amplify the bass sound of the speakers
to your personal preference.
P.4