Setting Or Changing Autotrack Camera Views - ParkerVision System II Presenter User Manual

Setting or Changing autoTrack
Camera Views
You may want to zoom-in slightly closer on the WIDE autoTRACK View
or adjust your position in the video frame more to the left or right.
You have the flexibility to customize each autoTRACK View to suit your needs.
While the procedure below is for changing the Right autoTrack view, the
procedure is the same for customizing Left, Tight, and Wide views as well.
To SET or CHANGE the right autoTRACK VIEW:
1. After pressing the RIGHT View button, use the SUBJECT
POSITION arrow buttons to position yourself to the desired
location in the video frame.
2. If you want to change the view, use the manual ZOOM buttons to set the
needed zoom perspective.
3. Press and hold the RIGHT button until you hear two beeps, indicating the new
setting has been stored.
To RECALL the right autoTRACK VIEW:
Press and release the RIGHT View button. The CameraMan then recalls the
information that you stored in the RIGHT button.
7