To Activate Autotrack - ParkerVision System II Presenter User Manual

To Activate autoTrack

There are two options.
1.
Touch the appropriate button on the Teacher Camera Control screen
of your Touch Panel.
(See the Teacher Camera Control
instructions in the Touch Panel User
Guide section of this manual.)
2.
Activate one of the autoTrack Views
on the CameraMan wireless -
remote control keypad.
It is possible to control the many of
the functions of the autoTrack
system using the Touch Screen
system, However, the wireless
keypad offers a number of features
that are not included on the touch
panels.
With the keypad, you can choose to
have the camera track you while
keeping you framed in the center of
a tight or wide shot.
(See following page.)
You can also choose to have the
camera track you while keeping you
to the right or left in the frame.
This feature can be very helpful when
referring to maps or charts or when
conversing with an individual.
The keypad will not function with weak or dead batteries. It does not
come equipped with rechargeable batteries. Check inside the rear of
your keypad for battery type. Although most keypads use two (2) AA
batteries, some use 9-volt batteries.
5