Table of Contents
Advertisement
THE FOLLOWING OPERATION MUST BE ACCOMPLISHED
BEFORE INSTALLING THE GLASS SHADE.
Caution: Remove 5 rubber packing mounts and discard before
installation.
Step 1. Attach the fan blade to the blade holder using the
screws and rubber washers provided. Tighten screws securely.
Repeat process for remaining blades.(Fig. 17)
Step 2. Rotate the motor so that the screw holes in motor are
aligned with the holes in blade holder and secure with proper
screws. Repeat process for the other blade holders. (Fig. 18)
BLADE INSTALLATION
SCREWS
RUBBER
WASHERS
BLADE
BLADE HOLDER
Fig 17
BLADE
HOLDER
SCREWS
BLADE HOLDER
Fig 18
8
Advertisement
Table of Contents
