Display Units Of Measure In; Personal Settings (Customer-Programmable Features) - Jeep Compass 2014 Owner's Manual

238 UNDERSTANDING YOUR INSTRUMENT PANEL
reset all digits will change to zeros and time will start
incrementing again if the ignition switch is in RUN or
START.

Display Units of Measure in

To make your selection, press and release the SELECT
button until "ENGLISH" or "METRIC" appears.
Personal Settings (Customer-Programmable
Features)
This allows the driver to set and recall features when the
transmission is in PARK (automatic transmission) or the
vehicle is stopped (manual transmission).
Press and release the MENU or DOWN buttons until
"Personal Settings" is displayed in the EVIC then press
the SELECT button.
Use the SELECT button to display one of the following
choices:
Language
When in this display you may select different languages
for all display nomenclature, including the trip functions.
Pressing the SELECT button while in this display selects
English, Espanol, Deutsch, Italiano, Francais or NL de-
pending on availability. As you continue, the displayed
information will be shown in the selected language.
NOTE: Uconnect® language will not change using the
EVIC. Please refer to "Language Selection" in Uconnect®
phone — If Equipped for details.
Auto Lock Doors
When ON is selected, all doors lock automatically when
the speed of the vehicle reaches 15 mph (24 km/h). Press
and hold the SELECT button when in this display until
"ON" or "OFF" appears to make your selection.