Power On/Off; Browse Function - Eaget M9 User Manual

Then HDD installation is completed, as shown below:

4. Power On/Off

4.1 Power On
Connecting the power cable and Video cable and switch on, then press the stand by key
on the remote controller or press the power key on the front panel of the player, power on
the TV and select the input signal by the connecting way, the player will soon enter into the
home menu.
4.2 Power Off
Press the power button on the front panel or press the standby key on the remote
controller, the player will soon enter standby mode, and the power indicator will turn red.
Then switch off to cut off the power supply then you can unplug the power cable.

5. Browse Function

5.1 Browsing Movie