Start Recording; (Optional-Purchase Mmc/Sd Card, Snapshot And Recording View Only); Stop Recording (Optional-Purchase Mmc/Sd Card Only); Delete Image - Humminbird 900 Series Installation And Operation Manual

Start Recording

(optional-purchase MMC/SD Card, Snapshot and
Recording View only)
Start Recording allows you to start sonar recording from the Snapshot and
Recording View. This menu option is only available when you have an
optional-purchase MMC/SD card installed and you are in Snapshot and
Recording View.
To start sonar recording:
1. Highlight Start Recording on the Snapshot and Recording X-Press™
menu, and press the RIGHT 4-Way Cursor key to start recording.
Stop Recording
(optional-purchase MMC/SD Card only)
Stop Recording allows you to stop sonar recording. This menu option is only
available when you have an optional-purchase MMC/SD card installed.
To stop sonar recording:
1. To stop recording, highlight Stop Recording from any X-Press™
menu.
2. Press the RIGHT 4-Way Cursor key.
Delete Image allows you to delete a single screen capture image from the
Snapshot and Recording View. This menu option is only available when you
have an optional-purchase MMC/SD card installed and you are in Snapshot
and Recording View and you have selected an image thumbnail.
To delete an image:
1. On the Screen Snapshot View, use the UP and DOWN 4-Way Cursor
keys to select the image you want to delete.
2. Highlight Delete Image on the Snapshot and Recording X-Press™
menu.
3. Press the RIGHT 4-Way Cursor key to initiate this procedure.
4. A Confirm Dialog box will appear. Select Yes to delete the image or
No to cancel the operation.
82

Delete Image

(optional-purchase MMC/SD Card, Snapshot and
Recording View only)