Daylight Saving Time (Advanced); Position Format (Advanced); Time Format (Advanced, International Only); Date Format (Advanced, International Only) - Humminbird 900 Series Installation And Operation Manual

Daylight Saving Time adjusts the time display to account for local Daylight
Saving Time. Selecting On adds one hour to the time display adjusted for
your local time zone. Selecting Off leaves the time display as adjusted for
your local time zone. This menu choice is available only when in Advanced
User Mode (see Setup Menu Tab: User Mode.)
To change the Daylight Saving Time setting:
1. Make sure you are in Advanced User Mode, then highlight Daylight
Saving Time on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Daylight
Saving Time On or Off. (Off, On, Default = Off)
Position Format selects the format of the latitude and longitude position
display. This menu choice is available only when in Advanced User Mode
(see Setup Menu Tab: User Mode.)
To change the Position Format setting:
1. Make sure you are in Advanced User Mode, then highlight Position
Format on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position
Format. (dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')
Daylight Saving Time
(Advanced)
Position Format
(Advanced)
Time Format changes the time format used by the unit This menu choice is
available only when in Advanced User Mode (see Setup Menu Tab: User
Mode.) International models only. Time Format selects a 12 hour or 24 hour
format for the time of day displayed when Time + Date is selected as a
Digital Readout on the Sonar View (see Select Readouts).
To change the Time Format:
1. Make sure you are in Advanced User Mode, then highlight Time
Format on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Time Format. (12 hour, 24 hour, Default = 12 hour)
Date Format changes the date format used by the unit This menu choice is
available only when in Advanced User Mode (see Setup Menu Tab: User
Mode.) International models only. Date Format selects the format for the date
display when Time + Date is selected as a Digital Readout on the Sonar View.
(see Select Readouts).
To change the Date Format:
1. Make sure you are in Advanced User Mode, then highlight Date
Format on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date
Format. (mm/dd/yy, dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)
114
Time Format
(Advanced, International only)
Date Format
(Advanced, International only)