3. How to remove the Control Board
(1) Remove the Upper Cover.
(2) Unfasten 2 screws M3x8 as shown below.
(3) Shift the Control Board in the arrow direction (1).
(4) Shift the Control Board in the arrow direction (2). and remove the Power Switch from the Bottom Cover.
Then lift in the arrow direction (3).
Remove the shield Plate together with the Control Board.
4. How to remove the Paper Holder
(1) Remove the Printer Cover.
(2) Unfasten a screw as shown below.
CITIZEN
4
CBM-910 Service Manual