General Guidelines • A video to help guide the installation is available on the MobileDemand website - technical support section. • Install the QW ERTY keyboard in a non-obstructive, safe location within the vehicle cab. • Avoid obstructing the following: •...
Thumb Screws to screw into the bottom of the T7200 Chassis 2. Turn the screws on the bottom of the QW ERTY keyboard into the xTablet T7200 until tightly secure. Using the QWERTY Keyboard Module with the MobileDemand xTablet T7200 Office Dock...
Page 4
3. Push the top of the xTablet T7200 into the cradle latch top until it clicks in place – this secures the top cradle latch onto the xTablet T7200. Using the QWERTY Keyboard Module with the MobileDemand xTablet T7200 Vehicle Mounts. VMT-20 or VMT-21 To use with an xTablet T7200 with an xTablet T7200 QWERTY Keyboard attached, a Latch Height Extension Kit is required.
Page 5
Standard Communications Module xTablet T7200 docks are shipped with a standard communications module that you will have to remove before installing the QWERTY keyboard. To remove the standard communications module • With the xTablet T7200 dock face down, use a Phillips screwdriver to remove the eight screws from the back and bottom of the communications module, then detach the communications module from the xTablet T7200 dock.
Page 6
CNTRL KEYS LEFT SIDE of KEYBOARD Section of KEYBOARD RIGHT SIDE of KEYBOARD To activate the Red keys, press the red Fn key along with the key that the Red key is assigned to. To activate the White keys, press the white Up Arrow key along with the key that the white key is assigned to. To press a keyboard Function Key like F1 for help, simply press the F1 key located in the top middle section.
Page 7
Some key tips: For Back Space, Press this key on the right side of the keyboard. For ENTER, Press this key on the right side of the keyboard. For typing a CAPITAL letter, Press this key in the bottom middle of the keyboard. For WINDOWS KEY, Press this key in the top middle of the keyboard...