Asus P-P55TVP4 User Manual page 30

14. IrDA-compliant infrared module connector (IR)
This connector supports the optional wireless transmitting and receiving infra-
red module. This module mounts to a small opening on system cases that sup-
port this feature. You must also configure the setting through "UART2 Use
Infrared" in Chipset Features Setup to select whether UART2 is directed for
use with COM2 or IrDA. Use the five pins as shown on the Back View and
connect a ribbon cable from the module to the motherboard according to the pin
definitions.
Infrared Module Connector
30
III. INSTALLATION
+5V
NC
IRRX
GND
IRTX
For the infrared feature to be available,
you must connect an optional Infrared
module to the motherboard.
ASUS P/I-P55TVP4 User's Manual
Front View
Back View
IRTX
GND
IRRX
+5V
NC