Installation Steps; Jumpers - Asus P-P55TVP4 User Manual

Pentium motherboard
Table of Contents

Advertisement

Installation Steps

Before using your computer, you must complete the following steps:
1. Set Jumpers on the Motherboard
2. Install DRAM Modules
3. Install the Central Processing Unit (CPU)
4. Install Expansion Cards
5. Connect Ribbon Cables, Cabinet Wires, and Power Supply
6. Setup the BIOS Software

1. Jumpers

Several hardware settings are made through the use of jumper caps to connect jumper
pins (JP) on the motherboard. See motherboard layout locations of jumpers. The jumper
settings will be described numerically such as [----], [1-2], [2-3] for no connection,
connect pins 1&2, and connect pins 2&3 respectively. Pin 1 for our motherboards is
Pin 1
always on top
board connector away from yourself. A "1" is written besides pin 1 on jumpers with
three pins. The jumpers will also be shown graphically such as
pins 1&2 and
for Short (On) and
may be sharing pins from other groups. Use the diagrams in this manual instead of
following the pin layout on the board. Settings with two jumper numbers require that
both jumpers be moved together. To connect the pins, simply place a plastic jumper
cap over the two pins as diagramed.
WARNING!
Computer motherboards and expansion cards contain very delicate
Integrated Circuit (IC) chips. To protect them against damage from static electric-
ity, you should follow some precautions whenever you work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do
not have one, touch both of your hands to a safely grounded object or to a
metal object, such as the power supply case.
3. Hold components by the edges and try not to touch the IC chips, leads or
connectors, or other components.
4. Place components on a grounded antistatic pad or on the bag that came with
the component whenever the components are separated from the system.
12
III. INSTALLATION
Pin 1
or on the left
when holding the motherboard with the key-
to connect pins 2&3. Jumpers with two pins will be shown as
for Open (Off). For manufacturing simplicity, the jumpers
ASUS P/I-P55TVP4 User's Manual
to connect

Advertisement

Table of Contents
loading

This manual is also suitable for:

I-p55tvp4

Table of Contents