Ozito CDL-5010 Instruction Manual
  1. Manuals
  2. Brands
  3. Ozito Manuals
  4. Cordless driver drill
  5. CDL-5010
  6. Instruction manual
Ozito CDL-5010 Instruction Manual

Ozito CDL-5010 Instruction Manual

18v li-ion cordless drill driver
Hide thumbs
Table of Contents

Advertisement

Quick Links

CORDLESS
DRILL
DRIVER
18V Li-ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
Chuck Size:
10mm Keyless
No Load Speed:
0-580/min
Torque Setting:
17
Max. Torque:
16Nm
Drilling Capacity:
15mm Wood
8mm Metal
Battery:
1.3Ah Li-ion
Charge time:
3 - 5 hours
Weight with Battery:
0.95 kg
ozito.com.au
WHAT'S IN THE BOX
Cordless Drill Driver
Drill Bits x 4
Driver Bits x 2
CDL-5010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CDL-5010 and is the answer not in the manual?

Questions and answers

Related Manuals for Ozito CDL-5010

Summary of Contents for Ozito CDL-5010

  • Page 1 Input: Chuck Size: 10mm Keyless No Load Speed: 0-580/min Torque Setting: Max. Torque: 16Nm Drilling Capacity: 15mm Wood 8mm Metal Driver Bits x 2 Battery: 1.3Ah Li-ion Charge time: 3 - 5 hours Weight with Battery: 0.95 kg ozito.com.au CDL-5010...

  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS DRILL DRIVER 1. BATTERY 1 Keyless chuck 5 Battery release button 2 Torque adjustment collar 6 18V Battery This charger is recommended for use with a residual current device with a rated residual current of 30mA or less. 3 LED Worklight 7 Forward/reverse lever Charging...

  • Page 3: Operation

    OPERATION 2. KEYLESS CHUCK 3. CONTROLS Variable Speed Trigger Installing Drill Bit 1. To start drilling squeeze 1. Hold the back sleeve of 2. With the other hand, turn the variable speed the chuck with one hand. the first chuck sleeve anti- trigger. clockwise. 2.

  • Page 4: Helpful Tips

    If the bit jams in the work piece or if the drill stalls, stop the tool immediately. Remove the bit from the work piece and determine the Note: Do not force the drill or apply side pressure to elongate the reason for jamming. hole. Let the drill do the work. CDL-5010...

  • Page 5: Maintenance

    Blow out the ventilation slots with compressed air periodically . Ensure the battery is properly charged. It will take 4-5 charging cycles Note: Ozito Industries will not be responsible for any damage or before the battery reaches optimum charge and run time. On the initial injuries caused by repair of the drill by an unauthorised person or by charge, the battery requires 5 hours of charging.
  • Page 6 Tool: Cordless Combo Kit SPARE PARTS Model No. CKL-8000 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. 18V Li-ion Battery Pack...

  • Page 7: Electrical Safety

    Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.

  • Page 8: Warranty

    • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO 0913 Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
  • Page 9 18V Li-ion Sand Paper INSTRUCTION MANUAL SPECIFICATIONS Input: No Load Speed: 9500/min Pad Size: 140 x 140 x 90mm Dust Bag Paper Fitment: Hook & Loop Battery: 1.3Ah Li-ion Charge time: 3 - 5 hours Weight with Battery: 1.10kg ozito.com.au DSL-2000...
  • Page 10 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS DETAIL SANDER 1. BATTERY 1 Hook & Loop Backing Pad 4 Battery Release Button This charger is recommended for use with a residual current 2 On/Off Switch 5 Battery 18V device with a rated residual current of 30mA or less. 3 Dust Extraction Chute Charging 1.

  • Page 11: Attaching Sandpaper

    OPERATION 2. ASSEMBLY 3. CONTROLS On / Off Switch Attaching Sandpaper 1. To turn on, push the slide lock on switch forward to “I” position. 1. Align the sanding sheet with the sanding pad and press on. 2. Replace the sanding sheet when it is worn. 2.

  • Page 12: Sanding Tips

    5. SANDING TIPS 4. SANDING Never force the sander. The weight of the sander supplies adequate 1. Secure the material to be pressure, allowing the sandpaper to do the work. Applying additional sanded where possible. pressure will slow the motor, rapidly wear the sandpaper, and greatly reduce the sander speed.
  • Page 13 Ensure the battery is properly charged. It will take 4-5 charging cycles before the battery reaches optimum charge and run time. On the initial Note: Ozito Industries will not be responsible for any damage or charge, the battery requires 5 hours of charging. Subsequent charging injuries caused by repair of the detail sander by an unauthorised only requires 3-5 hours.
  • Page 14 Tool: Cordless Combo Kit SPARE PARTS Model No. CKL-8000 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. 18V Li-ion Battery Pack...
  • Page 15 Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
  • Page 16 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0913...

  • Page 17: Led Work Light

    WHAT’S IN THE BOX LED WORK LIGHT LED Worklight 18V Li-ion INSTRUCTION MANUAL SPECIFICATIONS Input: Light Source: LED (1W 60 Lumen) Approx Run Time: 24 Hours Battery: 1.3Ah Li-ion Charge time: 3 - 5 hours Weight with Battery: 0.50 kg ozito.com.au WLL-018...

  • Page 18: Charging The Battery

    KNOW YOUR PRODUCT SETUP & PREPARATION 18V LED WORKLIGHT 1. CHARGING THE BATTERY 1 Rotating Head 3 Battery Release Button This charger is recommended for use with a residual current 2 On/off Switch 4 18V Battery device with a rated residual current of 30mA or less. 1.

  • Page 19: Installing The Battery

    OPERATION 2. INSTALLING THE BATTERY 3. CONTROLS On/off Switch Push the battery into the 1. To turn the worklight on, worklight base until it clicks press the on/off switch into place. once. 2. To turn off, press the on/off switch again. Hold down the battery Adjusting the Head of the Torch release buttons and pull...
  • Page 20 4. OPERATION 1. Place the worklight on a flat surface. 2. Ajust the angle of the head if required. 3. Turn the worklight WLL-018...
  • Page 21 Blow out the ventilation slots with compressed air periodically . Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the tool by an unauthorised person or by CARING FOR THE ENVIRONMENT mishandling of the tool.
  • Page 22 Tool: Cordless Combo Kit SPARE PARTS Model No. CKL-8000 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. 18V Li-ion Battery Pack...
  • Page 23 Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
  • Page 24 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0913...
  • Page 25 TRIM SAW Cordless Trim Saw 18V Li-ion INSTRUCTION MANUAL Guide Fence SPECIFICATIONS Input: No Load Speed: 2000/min Blade Diameter: 110mm Bore Size: 20mm Hex Key Cutting Capacity: 40mm Battery: 1.3Ah Li-ion Charge time: 3 - 5 hours Weight: 1.34kg ozito.com.au CSL-4010...
  • Page 26 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS TRIM SAW 1. BATTERY 1 Base Plate Locking Knob 6 Blade Flange 2 Base Plate 7 Lower Guard Lever This charger is recommended for use with a residual current 3 On/off Trigger 8 Guide Fence Locking Knob device with a rated residual current of 30mA or less.
  • Page 27 OPERATION 2. SETTING UP THE CUT 3. ON/OFF SWITCH Adjusting Depth of Cut 1. To turn on, depress 1. Loosen base plate the lock-off button (a) locking knob. then squeeze the on/off trigger (b). 2. Lower base plate to desired depth of cut. 2.

  • Page 28: Changing Blades

    5. CHANGING BLADES 4. CUTTING CAUTION: ENSURE BATTERY IS REMOVED FROM Note: The tool is recommended for wood cutting only and is not THE TOOL BEFORE CHANGING THE BLADE. recommended for use with abrasive wheels or masonry/diamond cutting wheels. Only use 110mm wood cutting blades. 1.
  • Page 29 Blow out the ventilation slots with compressed air periodically . ø /min Revolutions or Diameter reciprocation per minute Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the saw by an unauthorised person or by Electrical Emissions Transformer Energy mishandling. Conformity (EMC)
  • Page 30 Tool: Cordless Combo Kit SPARE PARTS Model No. CKL-8000 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. 18V Li-ion Battery Pack...
  • Page 31 Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
  • Page 32 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 1113...
  • Page 33 MULTI Cordless Multi Function Tool FUNCTION TOOL 18V Li-ion INSTRUCTION MANUAL Accessories SPECIFICATIONS Input: No Load Speed: 14,500/min Hex Key Oscillating Angle: 3.4º Fitment: Tooled Battery: 1.3Ah Li-ion Charge time: 3 - 5 hours Weight with Battery: 1.3kg ozito.com.au MFL-8010...
  • Page 34 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS MULTI FUNCTION TOOL 1. BATTERY 1 Accessory Drive Spindle 4 Rotating Base This charger is recommended for use with a residual current 2 On/off Switch 5 Battery Release Button device with a rated residual current of 30mA or less. 3 Sure Grip Body 6 Battery 18V Charging...

  • Page 35: Attaching Accessories

    OPERATION 2. ASSEMBLY 3. CONTROLS On / Off Switch Attaching Accessories 1. To turn on, slide the 1. Place accessory on/ off switch forward. over the drive spindle and position to suit angle needed for application. Note: E nsure the accessory is sitting flat on spindle and locking pins. 2.
  • Page 36 5. APPLICATIONS CONT. 4. APPLICATIONS Sanding Sawing In sanding mode, the multi function tool can be used on materials When sawing, the multi function tool can be used on wood, plastics such as wood, plastic and painted surfaces. and sheet metal. 1.
  • Page 37 Ensure the battery is properly charged. It will take 4-5 charging cycles before the battery reaches optimum charge and run time. On the initial Note: Ozito Industries will not be responsible for any damage or charge, the battery requires 5 hours of charging. Subsequent charging injuries caused by repair of the multi function tool by an unauthorised only requires 3-5 hours.
  • Page 38 Tool: Cordless Combo Kit SPARE PARTS Model No. CKL-8000 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. 18V Li-ion Battery Pack...
  • Page 39 Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
  • Page 40 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0913...
  • Page 41 18V Li-ion Nut Setter x 2 INSTRUCTION MANUAL SPECIFICATIONS Input: Chuck Size: 6.35mm Hex Drive No Load Speed: 0-2700/min Impact Rate: 0-3300/min Max. Torque: 90Nm Battery: 1.3Ah Li-ion Charge time: 3 - 5 hours Weight with Battery: 1.20kg ozito.com.au IDL-6010...
  • Page 42 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS IMPACT DRIVER 1. BATTERY 1 Drive Bit Retaining Ring 4 Variable Speed Trigger 2 LED Worklight 5 Forward/ Reverse Lever This charger is recommended for use with a residual current 3 Battery Release Button 6 Battery 18V device with a rated residual current of 30mA or less.
  • Page 43 2. KEYLESS CHUCK 2. KEYLESS CHUCK CONT. Installing a Hex Drive Socket or Driver Bit Installing a Socket Adaptor (Not Supplied) 1. Pull the drive 1. Pull the drive retaining ring retaining ring forward. forward. 2. Insert the hex shank of a 1/4”...

  • Page 44: Variable Speed Trigger

    OPERATION 3. CONTROLS 4. DRIVING Variable Speed Trigger 1. Depress and release the 2. Check the forward/reverse variable speed trigger to lever is on desired setting. ensure it is not locked on. 1. Squeeze the variable speed trigger to start the driver. 2.
  • Page 45 Ensure the battery is properly charged. It will take 4-5 charging cycles before the battery reaches optimum charge and run time. On the initial Note: Ozito Industries will not be responsible for any damage or charge, the battery requires 5 hours of charging. Subsequent charging injuries caused by repair of the impact driver by an unauthorised only requires 3-5 hours.
  • Page 46 Tool: Cordless Combo Kit SPARE PARTS Model No. CKL-8000 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. 18V Li-ion Battery Pack...
  • Page 47 Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
  • Page 48 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0913...
  • Page 49 WHAT’S IN THE BOX PRESET VOLUME TUNE/SEEK BAND CORDLESS RADIO PRESET Cordless Radio VOLUME TUNE/SEEK BAND 18V Li-ion INSTRUCTION MANUAL SPECIFICATIONS Input: AM Frequency: 522-1620KHz FM Frequency: 87.5-108MHz Speaker Output: Charge time: 3 - 5 hours Weight with Battery: 1.0kg ozito.com.au CRL-1000...
  • Page 50 KNOW YOUR PRODUCT SETUP & PREPARATION 18V CORDLESS RADIO 1. BATTERY 1 Control Panel 5 Battery This charger is recommended for use with a residual current 2 Worklight 6 Headphone Jack device with a rated residual current of 30mA or less. 3 Speaker 7 On/off Button Charging the Battery...

  • Page 51: Setting The Time

    OPERATION 2. OPERATION 3. SETTING THE TIME On/off Switch 1. Turn the radio off. 2. Press the preset button twice. 1. To turn the radio on, press 2. To turn off, press the on/off The time should appear on the on/off switch once. switch again.

  • Page 52: Setting The Alarm

    5. PROGRAMING 4. SETTING THE ALARM Setting up Favourite Stations 1. Turn the radio off. 2. Press the preset button once. An alarm symbol should It is possible to program the radio so that it remembers your appear on the display screen. five favourite stations.
  • Page 53 Blow out the ventilation slots with compressed air periodically . Note: Ozito Industries will not be responsible for any damage or CARING FOR THE ENVIRONMENT injuries caused by repair of the tool by an unauthorised person or by mishandling of the tool.
  • Page 54 Tool: Cordless Combo Kit SPARE PARTS Model No. CKL-8000 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. 18V Li-ion Battery Pack...
  • Page 55 Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
  • Page 56 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0913...
  • Page 57 No Load Speed: 2000/min Stroke Length: 13mm Blade Fitment: Universal (U -shaped) only Max. Cutting Capacity: Wood 20mm Charger Aluminium Sheet 2mm Non Alloy Steel 1mm Battery: 1.3Ah Li-ion Charge time: 3 - 5 hours Weight: 1.1kg ozito.com.au Adaptor CSL-018...
  • Page 58 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS CUT SAW 1. BATTERY 1 Lock-off Button 5 On/off Trigger 2 Sure Grip Handle 6 Front Shoe This charger is recommended for use with a residual current device with a rated residual current of 30mA or less. 3 18V Battery 7 Tool-free Blade Clamp Charging...

  • Page 59: Installing Blades

    OPERATION 2. SETUP 3. CONTROLS Installing Blades Turning On/Off 1. Depress the blade 1. To turn on, slide the clamp lever as far as lock-off button down possible. then squeeze the on/off trigger. 2. The blade can be installed with the teeth facing up or down 2.
  • Page 60 4. CUTTING 1. Secure the work piece if necessary. 2. Press the front shoe firmly against the workpiece without allowing the balde to make contact. 3. Turn the cut saw on. 4. Ease the blade into workpiece. Use a rocking motion to assist the cut saw in cutting the material.
  • Page 61 Blow out the ventilation slots with compressed air periodically . ø /min Revolutions or Diameter reciprocation per minute Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the saw by an unauthorised person or by Electrical Emissions Transformer Energy mishandling. Conformity (EMC)
  • Page 62 Tool: Cordless Combo Kit SPARE PARTS Model No. CKL-8000 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. 18V Li-ion Battery Pack...
  • Page 63 Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
  • Page 64 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0813...

Table of Contents