Denon CEOL carino Owner's Manual page 39

Contents Connections
o The input source does not switch
Symptom
Even when I touch the input
0
source switching key (W),
0
the input source does not
switch.
o Paring fails
Symptom
Paring fails.
0
0
0
0
o NFC connection fails
Symptom
NFC connection fails.
0
0
Front panel Display
Playback
Touch the input source switching key (W) with your finger properly.
Use the input source switching button (W) on the remote control unit to switch the input source.
Turn off and on power to this unit.
Place the Bluetooth device within 1m of this unit and perform paring again.
Search for devices from the list of the Bluetooth devices.
Turn off and on power to Bluetooth devices.
Check that the Bluetooth device has the NFC function.
Touch the N mark (Q) on this unit, checking the location of the NFC antenna on the Bluetooth device.
Touch surely until the Bluetooth device responds.
Rear panel
Setting procedure
Cause / Solution
Cause / Solution
Cause / Solution
39 Remote
Tips Appendix
Page
Page
Page
Index
22
22
21
26
－
－
－
30