Follow Instructions To Avoid Interference Problems; Medical Devices; Regulatory Information; Specific Absorption Rate (Fcc & Ic) - Motorola Moto G User Manual

Follow Instructions to Avoid Interference Problems

Turn off your mobile device in any location where posted notices instruct you to do so, such as
hospitals or health care facilities.
In an aircraft, turn off your mobile device whenever instructed to do so by airline staff. If your
mobile device offers an airplane mode or similar feature, consult airline staff about using it in
flight.

Medical Devices

If you use an implantable pacemaker or defibrillator, consult your healthcare provider and the
device manufacturer's directions before using this mobile device.
Persons with a pacemaker or defibrillator should observe the following precautions:
●
ALWAYS keep the mobile device more than 20 centimeters (8 inches) from the
pacemaker or defibrillator when the mobile device is turned ON.
●
Use the ear opposite the pacemaker or defibrillator to minimize the potential for
interference.
●
Turn OFF the mobile device immediately if you have any reason to suspect that
interference is taking place.

Regulatory Information

Your Motorola mobile device is designed to comply with national and international regulatory
requirements. For full compliance statements and details, please refer to the regulatory
information in your printed product guide.
Specific Absorption Rate (FCC & IC)
YOUR MOBILE DEVICE MEETS FCC AND IC LIMITS FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for
exposure to radio waves (radio frequency electromagnetic fields) adopted by the Federal
Communications Commission (FCC) and Industry Canada (IC). These limits include a
substantial safety margin designed to assure the safety of all persons, regardless of age and
health.
The radio wave exposure guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 1.6 W/kg. Tests for SAR are
conducted using standard operating positions with the device transmitting at its highest certified
power level in all tested frequency bands. The highest SAR values under the FCC and IC
guidelines for your device model are listed below:
Safety, Regulatory & Legal 112