Motorola Moto G User Manual page 11

1. Press and hold the Power key to turn the phone on. Then charge up the battery when
you need to.

If your phone is activated, it will turn on, search for service, and begin the setup
process.

If your phone is not yet activated, see
2. Plug the USB connector into the charger/accessory jack on the bottom of your phone.
3. Plug the AC adapter into an electrical outlet. Fully charging a battery may take up to
three hours. Your phone may turn on when you connect the AC adapter to the outlet—
this is normal.
Note: Your phone's battery should have enough charge for the phone to turn on and find a
signal, run the setup application, set up voicemail, and make a call. You should fully charge the
battery as soon as possible.
Note: Don't try to remove or replace the battery yourself—doing so may damage the battery and
could cause burning and injury. If your phone becomes unresponsive, try a reboot—press and
hold the Power key until the screen goes dark, and your phone restarts.
Any time you want to see what's using up phone battery power, touch Apps
> Battery. To set automatic rules to save power, touch Apps
Get Started
Activate Your Phone for more information.
>
> Settings
Assist.
2