imagistics C650 Operating Manual page 17

2
Chapter
1 Touch Panel
1
•Shows various screens and
messages. p. 18
Print Key
2
2
•Press to start copy cycle. p.25
•If pressed while the copier is warming
up, it enables the Auto Copy Start
Function. p.21
Clear Key
3
3
Press to:
•Reset the, multi-copy entry 1. p.25
•Clear zoom ratio entered when setting
one form the 10-Key Pad. p.38
4
Stop Key
4
•Press to stop a multi-copy cycle. p.25
5 Reset Key
5
•Press to set the copier into the initial
mode, clearing all settings made previ-
ously on the control panel. p.21
Note: It does not, however, clear the con-
tents of the zoom and job program
memory and the settings made immedi
ately before the Interrupt mode.
16
Overview
13
10
Programming
Job Presets
Review Settings
11 12
6 Interrupt Key p. 22
6
•Press to interrupt a current job with a
different one.
•Press it again to return to the previous
job.
7 Energy Saver Key
7
•Press to set the copier into the
Energy Saver mode. p.21
8 Access Mode Key
8
•Press to enter the access number
p.22
Note: This key becomes valid only when
Copy Track of the Administrator mode
available through the Key Operator
function is set.
9 10-Key Pad
9
Use to enter :
•The number of copies to be made. p.25
•The zoom ratio to be used. p. 38
•The number of originals.
1