OEM IPX7A-ION Reference Manual page 27

8 BIOS Setup reference
Security
Change User Password
Select this item to set or change the user password. The User Password item on
the top of the screen shows the default Not Installed. After you set a password,
this item shows Installed.
To Set A User Password
1. Select the Change User Password item and press <Enter>.
2. On the password box that appears, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message "Password Installed" appears after you set your password success-
fully. To change the user password, follow the same steps as in setting a user
password.
Clear User Password
Select this item to clear the user password.
Password Check
When set to [Setup], BIOS checks for user password when accessing the Setup
utility. When set to [Always], BIOS checks for user password both when accessing
Setup and booting the system.
Default: [Setup] / Options: [Setup] [Always]
Boot Sector Virus Protection
This item allows you to enable or disable the Boot Sector Virus Protection.
Default: [Disabled] / Options: [Disabled] [Enabled]
IPX7A-ION Motherboard Reference Guide 27