Change Supervisor Password - OEM IPX7A-ION Reference Manual

8 BIOS Setup reference
Security
Advanced
Main
Security Settings
Supervisor Password
User Password

Change Supervisor Password

v02.67
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor Pass-
word item on the top of the screen shows the default Not Installed. After you set a
password, this item shows Installed.
To Set A Supervisor Password:
1. Select the Change Supervisor
Password item and press <Enter>.
2. From the password box, type a
password composed of at least six
letters and/or numbers, then press
<Enter>.
3. Confirm the password when
prompted.
The message "Password Installed" appears after you successfully set your pass-
word. To change the supervisor password, follow the same steps as in setting a
user password. To clear the supervisor password, select the Change Supervisor
Password then press <Enter>. The message "Password Uninstalled" appears.
NOTE: If you forget your BIOS password, you can clear it by erasing the
CMOS Real Time Clock (RTC) RAM. See your hardware documentation for
information on how to erase the RTC RAM.
26
BIOS SETUP UTILITY
Power Security
:Not Installed
:Not Installed
(C) Copyright 1985-2009, American Megatrends, Inc.
Exit
Boot
Install or Change the
password.
Enter
F1
F10
ESC
Enter New Password
IPX7A-ION Motherboard Reference Guide
Select Screen
Select Item
Change
General Help
Save and Exit
Exit