Table of Contents
Advertisement
Installation and Operation Manual
VoIP Gateway
12
Gateway
12.1 General
1
Select Gateway > General.
Figure 65. Gateway
2
Select/Enter following settings.
Field name
• Call Logging
• Route Logging
• Billing CDRs only
• Logging Filter
(GW:Nr)
The lower area of the window displays the installed licenses and the current
use of these licenses.
Licenses
3
Click "OK".
2009-03-10 / Ver. E
Figure 73.
Description
Enable if you want to log calls.
Enable if you want to log routing.
If enabled only outgoing, external calls, which will be
billed, are recorded. See
Transmission of Call Detail Records
For support purposes. This feature allows to
temporarily reduce the logging output relating to
Diagnostics/Logging/Relay Calls. An interfaces name
and/or a number can be entered. The call logging
output will then be reduced to calls matching the
direction towards the interface/cdpn or matching the
direction from the interface/cgpn. For example,
GW1:44 shows calls towards GW1 where the CDPN
starts with 44. Calls from GW1 with the CGPN 44 will
also show up.
The Count row shows how many registrations the
license is valid for, and the Usage row shows the
number of registrations.
TD 92326GB
12.6 CDR0/CDR1 –
on page 98.
84
Advertisement
Table of Contents
Need help?
Do you have a question about the TD 92326GB and is the answer not in the manual?