NCI 122X User Manual page 4

Specifications
Interface Interface- - - - - Serial Interface Serial Serial Serial
Interface Interface Serial
Interface Interface-P -P -P -P -Parallel Interface arallel arallel arallel
Interface Interface arallel
Character Buffering Character Buffering
Character Buffering Character Buffering Character Buffering
P P P P P rint Method rint Method rint Method rint Method
rint Method
Character Matrix Character Matrix
Character Matrix Character Matrix Character Matrix
Character Spacing Character Spacing
Character Spacing Character Spacing Character Spacing
Line Feed Spacing Line Feed Spacing
Line Feed Spacing Line Feed Spacing Line Feed Spacing
P P P P P rint Speed rint Speed rint Speed rint Speed
rint Speed
P P P P P aper aper aper
aper aper
P P P P P ower ower ower ower
ower
AC V AC V oltage oltage
AC Voltage AC V AC V oltage oltage
DC V DC Voltage DC V oltage oltage oltage
DC V DC V oltage
External Dimensions External Dimensions External Dimensions
External Dimensions External Dimensions
Operating T Operating Temp. Operating T emp. emp. emp.
Operating T Operating T emp.
Available baud rates:
300, 600, 1200, 2400, 4800, 9600, 19200
Voltage levels:
RS-232C: -9 Volts to + 9 Volts
TTL: 0 Volts to + 5 Volts
20mA current loop
RS-485: 200mV differential
Character format:
Standard ASCII character set—10 or 11 bits per
character, 7 or 8 data bits.
Even or odd parity selection for 7 data bits.
Bit mapped graphics—10 bits per character
required
Busy signal - Clear to Send (CTS) or XON-XOFF
36-pin Centronics
1.5K standard
8K optional
Approximately 9500 byte capacity with option installed.
Impact dot matrix
5 x 8 or 5 x 5
24 column:
32 column:
40 column:
7.6 lines per inch, character mode
9.1 lines per inch, graphic mode
38 lines per minute for 24 column
33 lines per minute for 32 and 40 column
Table top:
Panel mount:
1 Watts (idle), 10 Watts (while printing)
9 VAC (120 VAC stepdown converter included)
Multi-national converters optional
Optional 9-12 VDC
100mA idle, 1500mA with 100% printing, 2.9A peak with
100% printing
4.1"W x 4.5"L x 2"H
5°C to 40°C, 41°F to 104°F
12.8 characters/inch
17 characters/inch
21 characters/inch
2.25"W x 2.75"D; 0.44" I.D.
2.25"W x 1.25"D