NCI 122X User Manual page 16

P P P P P arity arity arity
arity arity
Stop Bits Stop Bits Stop Bits Stop Bits Stop Bits
Handshake e e e e Handshak Handshak
Handshak Handshak
Handshake is
used for serial
interface only.
Columns Columns Columns Columns Columns
Invert Invert Invert Invert Invert
Font Font Font
Font Font
Magnification Magnification Magnification
Magnification Magnification
11 11 11 11 11
Parity can be selected only if 7 data bits are set. Choose
Odd or Even. If you choose 8 data bits, parity defaults to
None.
ST ST ST ST STOP BITS OP BITS OP BITS OP BITS is the next parameter. Choose 1 or 2 stop bits.
OP BITS
1 stop bit is used for 10 bit words, 2 stop bits are used for
11 bit words.
H H H H H ANDSHAKE ANDSHAKE ANDSHAKE ANDSHAKE ANDSHAKE is the next parameter. Choose from the
following settings:
BUSY-LINE
BUSY-BUFFER
XON/XOFF-LINE
XON/XOFF-BUFFER
NONE
COLUMNS COL COL UMNS UMNS is the next parameter. Select the number of UMNS
COL COL UMNS
characters per line (columns) for this parameter. The
choices you have are 24, 32, or 40. Below are samples of
each:
INVERT INVERT
INVERT INVERT is the next parameter. Choose OK if you want INVERT
inverted text (upside down) or NEXT if you want non-
inverted text (right side up) in your printouts. Below is an
example of inverted text.
FONT FONT FONT is the next parameter. Choose from a 5 x 5 dot
FONT FONT
matrix print pattern or a 5 x 8 dot matrix pattern. The
5 x 5 dot pattern produces only upper case (capital)
letters.
The last parameter is MAGNIFICA
size of printed type from your printer. Your choices (with
examples) are
NONE
DOUBLE WIDE
MAGNIFICATION MAGNIFICA MAGNIFICA MAGNIFICA TION. This refers to the TION TION TION