System Info; Event Log; Array Management - Acard AEC-6885 User Manual

AEC-6885 User's Manual

5.2.5 System Info

Click "System Info" to find the information and status of your RAID and hard drives.

5.2.6 Event Log

Click "Event Log" to find all important things about RAID such as the damage, re-
moval, and adding of hard drives. However, in the beginning there is no record.

5.2.7 Array Management

Click "Array Management" to find a more user-friendly interface than BIOS. Via the
interface you can set or change your RAID easily. The example in Figure 5-3 shows
Array 0 and Array 1, and the highlighted Array 0 has two hard drives.
NOTICE: The numbering of hard drives is HD0: IDE1-Master, HD1:
IDE1-Slave, HD2: IDE2-Master, HD3: IDE2-Slave, etc. The numbering of
array is according to the first hard drive's number in the array.
Figure 5-3
26