Chapter 2 Hardware Installation; Quick Installation; The Board Layout - Acard AEC-6885 User Manual

Chapter 2 Hardware Installation

2.1 Quick Installation

Please follow the 7 steps to install AEC-6885 at once.
(1). Be sure that the system power has been off.
(2). Open the housing of PC.
(3). Insert AEC-6885 into an available PCI slot firmly.
(4). Screw AEC-6885 onto the housing.
(5). Connect AEC-6885 to the hard drives with an ATA 133 cable.
(6). Connect a 4-pin power cord to the hard drives.
(7). Screw the housing and power on the system.

2.2 The Board Layout

The layout of AEC-6885 board is shown as follows.
IDE 3
IDE 4
AEC-6885 User's Manual
7
IDE 1
IDE 2
LED