Care & Maintenance - Ninja Ultima BL800 Owner's Manual

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base
is unplugged from the power source before
inserting or removing any attachment and
before cleaning.
CAUTION: DO NOT immerse the motor base
into water or any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and
wipe dry.
3 Place the pitcher in the dishwasher. Place
the lid and attachments on the top rack.
Use caution when handling the blade
assemblies as the blades are very sharp.
Always hold the top blades by the shaft.
NOTE: You may also wash the pitcher by filling
¾ of the pitcher with warm water and a drop
of dish washing detergent, placing the lid on
and pressing the pulse button a few times.
Once clean, remove the pitcher from the motor
base. Rinse the pitcher, attachment and lid
under running water. Allow all the parts to dry
before storing.
Please call customer service if any servicing
needs to be performed on the appliance at
1-877-646-5288.
11 TOLL FREE: 1-877-646-5288
HOW TO STORE
1 Store the Ninja Ultima
upright with the pitcher attached to the motor
base, top blades inside the pitcher and lid
secured tightly on the pitcher.
RESETTING THE MOTOR THERMOSTAT
The Ninja Ultima Dual Stage blender
™
features a unique safety system which
prevents damage to the unit's motor and
drive system should you inadvertently
overload your appliance. If the appliance is
being overloaded, the motor will stop and
the power indicator light will flash. To reset
the appliance, follow the resetting procedure
below:
1 Unplug the appliance from the electrical
outlet.
2 If using the top blades, carefully remove them
by the shaft, ensuring that no food is jamming
the top or bottom cutting blades.
CAUTION: The blades are extremely sharp
- handle with care! Always hold the top
blades by the shaft.
3 Allow the appliance to cool for approximately
15 minutes.
4 Re-install the container onto the base,
carefully re-insert the top blades (if using) and
re-plug the appliance into the electrical outlet.
NOTE: Ensure that the blades are seated
properly by standing the blades upright in
the jar. If the blades are not seated properly
on the star-shaped post, carefully check the
underside of the top blade assembly to ensure
there's no food in the way. Rinse if necessary.
Do not operate if the top blades are not
upright at any time.
5 Proceed to use the appliance as before,
making sure not to exceed the recommended
maximum capacities.
Dual Stage blender
™