Enercell 150-Watt Power Inverter User Manual

Enercell 150-Watt Power Inverter User Manual

150-watt power inverter

Advertisement

22-134
Please read this user's guide before using your
new power inverter.
150-Watt
Power Inverter
User's Guide
T
TM
M
2/3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 150-Watt Power Inverter and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Enercell 150-Watt Power Inverter

  • Page 1 22-134 User’s Guide 150-Watt Power Inverter Please read this user’s guide before using your new power inverter.
  • Page 2: Package Contents

    Package contents Power Inverter Quick Start Features • Automatically shuts down if the vehicle’s battery runs low to prevent total battery discharge. • Converts 12VDC power from vehicle battery into 115VAC power. • Ideal for camcorders, video game consoles, notebook computers, battery chargers, small TVs, and DVD players.
  • Page 3 Plug Inverter into your vehicle’s power port Adjust the inverter plug for better positioning. Power Indicator Lights when the inverter is connected.
  • Page 4 Plug in device Notes: • Device must draw 150W or less of continuous AC power. • If necessary, you can use an AC extension cord. The extension cord’s rating should be equal to or greater than the device’s rating.
  • Page 5: Replacing The Fuse

    Replacing the Fuse If the fuse has blown, replace it with a 20A, 32V blade-type fuse (not supplied). 1. Take out the fuse with pliers. 2. Insert the new fuse. Caution: Do not use a fuse with a different rating. Doing so can damage your inverter.
  • Page 6: Troubleshooting

    Troubleshooting If an appliance doesn’t power up, or the power indicator doesn’t light, there are several possible causes: • Defective device plugged into the inverter. Try another device to see if the first one is defective. • Vehicle battery voltage is lower than 10V.
  • Page 7: Safety Information

    Heat Dispersion Position the inverter where air flows freely around it to allow the heat to disperse. The inverter’s thermal protection prevents it from operating if its temperature exceeds 158°F (70°C). If the inverter gets too hot while working, it will turn off. Operation resumes when the temperature decreases to about 104°F (40°C).
  • Page 8: Specifications

    Caution: • Do not connect devices that require power greater than 150 watts to the inverter. • Do not use the power inverter in a positive- grounded vehicle. Check with your mechanic to determine if your vehicle is positive-grounded. • The total power for multiple devices connected to the AC, DC and USB socket cannot exceed 150 watts.
  • Page 9: Fcc Information

    Dimensions (H × W × D) ....1.85 x 2.91 x 5.43 in............(47 x 74 x 138 mm) Weight ............6.5 oz (185 g) Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document.
  • Page 10 Protect the environment by recycling used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. © 2010. Ignition L.P . All rights reserved. Printed 07B10 Enercell is a trademark used by Ignition L.P . in China 22-134...

This manual is also suitable for:

22-134

Table of Contents