1260 Kempar, Madison Heights, MI, 480871 U.S.A. Phone:248-733-0400, Fax: 775-587-5352
Email: info@dfgus.com Website: www.dfgus.com
3. Cut and crimp the ends of the
spiral coil.
Right handed
A. Hold pliers with red dot up,
with the coil near you.
B. Place pliers with jaws inside
the coil, near the center.
C. Close the pliers to cut the coil
and keep them closed
D. Optionally twist pliers to bend
crimp more before releasing
E. Release coil, flip the book
over sideways and crimp the
other side using the same
procedure (coils still near
you)
Left handed
Use pliers as described above but
hold them in your left hand and put
the red dot down.
Need help?
Do you have a question about the TitanCoil and is the answer not in the manual?
Questions and answers