Advertisement
Dear Customer,
Thank you for purchasing TitanCoil machine. The following are basic installation and
operation instruction. For advanced punching and binding, please contact DFG.
Installation
Remove the black knob from machine. Install the punch handle. Install the black knob
back to machine. Connect power cord and connect the foot pedal.
Remove the
black knob
How to Punch
1260 Kempar, Madison Heights, MI, 48071, U.S.A. Phone:248-733-0400, Fax: 775-587-5352
Email: info@dfgus.com Website: www.dfgus.com
Install the punch handle
and black knob
1. Set the side guide to center the
sheet for punching
2. Select the punch margin (tip – the
thicker the book, the larger the punch
margin can be. However, you can use
a small punch margin for any book)
3. Make sure your sheets are all the
way inside, against the back wall, and
then move sheets to the left side
against the side guide. Pull the
punching handle to punch.
Connect foot pedal and
power cord (not shown)
knob
Advertisement
Need help?
Do you have a question about the TitanCoil and is the answer not in the manual?
Questions and answers