Adjusting The Interactive Settings; General Settings - Dymo MimioClassroom User Manual

Customizing MimioStudio
3. Click Combine.
4. Choose the arrangement of your combined surfaces from the Extend Surface Styles list.
5. Press the New Page button, , on each MimioCapture tray, in the order shown.
6. Enter a name for your extended surface in the Extend Surface Name box and click OK.
To create a combined surface (Mimio Interactive)
1. Connect two or more Mimio Interactive devices to your computer.
2. Set the surface size for each Mimio Interactive device.
3. Click Combine.
4. Choose the arrangement of your combined surfaces from the Extend Surface Styles list.
5. Press the New Page button,
6. Enter a name for your extended surface in the Extend Surface Name box and click OK.
To view device information
To reset to the default device settings

Adjusting the Interactive Settings

The Interactive settings allow you to calibrate or enable (if calibration has already been
done) Interactive mode. The Interactive settings also contain settings for changing the
functions of the MimioTeach stylus, Mimio Interactive mouse, MimioTeach bar,
MimioCapture tray buttons, and Mimio Interactive bar buttons.

General Settings

Setting
Use previous calibration
Automatically enable
when a device is
detected
136
The Create extended surface dialog box appears.
You can combine up to four different surfaces.
The Create extended surface dialog box appears.
You can combine up to four different surfaces.
Click Settings.
The dialog box appears showing the device information, environmental analysis, and
device memory.
Click Defaults.
Description
Prevents you from having to calibrate each time you start Interactive
mode.
Select this setting if you have a permanently installed whiteboard and
projector.
Automatically starts Interactive mode when a MimioTeach or Mimio
Interactive bar is connected to your computer.
, on each Mimio Interactive bar, in the order shown.