About Mimiostudio View; Getting Started; Installing Mimioview - Dymo MimioClassroom User Manual

About MimioStudio View

The View window displays the image captured by the MimioView camera. From the View
window, you can rotate or zoom the image, mark up the image using MimioStudio Tools,
adjust the contrast and brightness settings, freeze the image, and so on.
The following table describes the major features of the MimioStudio View window.

Getting Started

Review the following topics to install and start using MimioView.
n
n
n

Installing MimioView

Once you have installed the MimioStudio software on your computer, you can quickly
install MimioView.
To install MimioView
1. Remove the protective covering from the MimioView camera lens.
2. Plug the USB cable into the Micro-B USB port on the back of the camera base.
Lamps on/off
Auto tune
Adjust brightness, contrast, and focus
Rotate counter-clockwise 90 degrees
Rotate clockwise 90 degrees
Freeze image
Clear all markups
Installing MimioView
Opening the View Window
Closing the View Window
Getting Started
Copy image
Zoom in
Zoom out
Zoom to fit window
Open MimioStudio Tools
Record live image
View full screen
115