1. Place the document under the MimioView camera.
2. Adjust the camera head so that the desired image is displayed in the View window.
3. Adjust the lamps to light the document as desired.
4. Press
Displaying an Object
Using MimioView, you can display a three-dimensional object. The camera and lamps are
each attached to the MimioView base by a flexible, gooseneck. This allows you to precisely
position the camera and lamps for the best possible view of the object you are displaying.
To display a three-dimensional object
1. Place the object under the MimioView camera.
2. Adjust the camera head so that the desired image is displayed in the View window.
3. (Optional) Press
4. Adjust the lamps to light the object as desired.
5. Press
Displaying a Microscope Slide
Using the included microscope adapter, you can display an image from a microscope with
the MimioView camera.
The microscope adapter can be used with a 28 mm microscope eyepiece.
To display a microscope slide
1. Set up the microscope so that you have the desired view through the microscope
eyepiece.
2. Twist and lock the microscope adapter onto the MimioView camera head.
3. Slowly and carefully slide the other end of the microscope adapter onto the microscope
eyepiece.
Use caution to make sure that the image stays in focus while attaching the
microscope adapter.
The image from the microscope is displayed in the View window.
4. Make any adjustments necessary to the microscope to adjust the image.
5. Press
Freezing the Image
The image captured by the MimioView camera is displayed in the View window. By
default, a live image is displayed. However, you can choose to display a still image of the
on the MimioView base.
to rotate the image to the desired orientation.
on the MimioView base.
on the MimioView base.
Using MimioView
117