Table of Contents
Advertisement
Passover Shelf with Duct Enclosure Panels
Before installing the enclosure panels, make sure the hood is hung in position with all the ductwork
attached and fire system connections completed.
1. Attach mounting channels to the wall in the correct location.
. Fasten end and front enclosure panels to Passover shelf with fasteners provided.
3. Bolt front and end enclosure panels together with the 5/16 in. bolts provided in the hardware
package.
4. Place enclosure assembly on hood top, tack-weld shelf to hood in rear corners.
5. Attach the end enclosure panels to mounting channels (fasteners provided).
6. To allow for ease of cleaning, caulk the external seams with NSF Approved silicone caulk.
(GE SCS1009, or its equivalent). The caulk is not provided.
7. Installation instructions may not be applicable for concrete ceilings.
Mounting Channels
1
End Enclosures
Front Enclosure
Passover Shelf
Fig. 17
Advertisement
Table of Contents
