Cleaning The Pre-Motor Filter - Vax 30000 User Manual

Maintenance
IMPORTANT: Ensure that the machine is switched o and unplugged from the socket before carrying out
any maintenance.

Cleaning the Pre-Motor Filter

Remove the motor top from the
unit, turn on its side and remove the
oat housing in an anti-clockwise
direction to unscrew.
Cleaning the Pleated Pre-Motor Filter Assembly
Remove the lter by twisting gently.
This will release it from the motor
housing.
13
(Keep your Vax as good as new)
Remove the blue lter and wash
under a tap. Allow to dry thoroughly
before replacing back into the
machine. Replace with a new lter
as necessary.
Clean by tapping it against the side of
a bin or by brushing gently.
NOTE: Do not wash this lter.
Turn the oat housing in a clockwise
direction until secure and place the
motor top back onto the unit.
Vax Service line:
AU: 1300 361 505
NZ: 0800 800 900