Amana Top Freezer Refrigerator Owner's Manual page 4

I ,
NSTALLATION
CONT
Handle installation
FREEZER DOOR
REFRIGERATOR DOOR
OR
REW
OTTOM
FOR
S. DO NOT
SIZE.
NOTE:
ALL HANDLE TIE DOWN SCREW
HOLES AT THE TOP AND BOTTOM
OF THE DOORS ARE SIZED FOR
SELF THREADING SCREWS. DO NOT
DRILL THEM TO A LARGER SIZE.
3
.
TOP OF FREEZER DOOR
A B
ALIGN HANDLE OVER SCREW
HOLES. FIRST INSTALL THE "A"
SCREW TO SECURE HANDLE,
FOLLOWED BY THE "B" SCREW.
DO NOT OVER TIGHTEN.
PUSH HANDLE AGAINST DOOR
AND SECURE BOTTOM END OF
HANDLE WITH TWO SCREWS.
DO NOT OVERTIGHTEN.
A B
NO. 2 PHILLIPS SCREW
DRIVER IS REQUIRED
FOR INSTALLATION.
ALIGN HANDLE OVER
SCREW HOLES. FIRST
INSTALL THE "A" SCREW
TO SECURE HANDLE,
FOLLOWED BY THE "B"
SCREW. DO NOT OVER
TIGHTEN.
NO. 2 PHILLIPS SCREW
DRIVER IS REQUIRED
FOR INSTALLATION.
FASTEN BOTTOM END
OF HANDLE TO DOOR.
PRESS END CAP
INTO PLACE.
Door adjustment
(IF NEEDED)
Door should be level when the cabinet is
level.
• The freezer door is too high.
Loosen
screws
Foam door
spacer –
• Both doors are too high.
Remove
Loosen
hinge cap
screws
Loosen screws and slide
lower hinge right to lower doors.
• Both doors are too low.
Remove
hinge cap
Loosen screws
Loosen screws and slide
lower hinge left to raise doors.
• Retighten screws after making
adjustments.
* Refer to installation instructions for
more information.
Remove
hinge cap
DO NOT
discard