Video - D-Link DCS-933L User Manual

Section 3 - Configuration
This section allows you to configure the video settings for your camera.
Video Profile: This section allows you to change the Resolution, FPS, and Quality.
Encode Type: Your camera has separate settings for the H.264 and MJPEG video streams.
Resolution:
Select the desired video resolution from three formats: 640x480, 320x240, and
160x112. Higher settings offer better quality, but will require more bandwidth
to stream.
Bit Rate:
The bps will affect the bit rate of the video recorded by the camera. Higher bit
rates result in higher video quality but a larger file size.
Frame Rate:
Select the frame rate(FPS) to use for the video stream. Higher settings offer
better quality, but will require more bandwidth to stream.
JPEG Quality: Select one of five levels of image quality: Highest, High, Medium, Low, and
Lowest.
View Mode: Select the default video codec to use when viewing your video on the Live
Video page.
Light Frequency:
Select the frequency used by your lighting and power to help reduce image
flicker.
D-Link DCS-933L User Manual

Video

29 29