Section 3 - Configuration
Using the Web Configuration Interface
After completing the Camera Setup Wizard, you are ready to use your camera. The camera's built-in Web configuration interface
is designed to allow you to easily access and configure your DCS-933L. At the end of the wizard, click Go To Camera or enter
the IP address of your camera into a web browser, such as Internet Explorer
password you created in the Setup Wizard. If you did not create a password, the default password is blank. After entering your
password, click OK.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP
is 192.168.0.20.
D-Link DCS-933L User Manual
Configuration
. To log in, use the User name admin and the
®
19
19