Table of Contents
Advertisement
Installing the remote control on a Left-Hand-Drive
vehicle (CANADA only)
When the remote control is installed on a Right-Hand
-Drive vehicle, the horizontal position are inverted.
1.
Secure Cover holder
circumference of the steering wheel with belt
Fit the Cover holder
that the arrow-marked side faces the driver as
shown by picture.
2.
Cut the extra portion of the belt at the center of
the cover holder.
3.
Install holder wheel
and secure with screws
Tighten the screw with driver.
4.
Install the remote control unit
When removing the remote control unit from the
holder, move the corrugated release section
toward the steering wheel as far as possible
before sliding the remote control unit toward you.
Connecting devices
a
to the inner
a
to the steering wheel so
on the cover holder
b
.
d
e
in the holder.
21
c
.
c
a
b
d
a
a
e
Advertisement
Table of Contents
Troubleshooting
