LG LN790 Series Quick Reference Manual page 3

Check your state and local traffic laws before mounting. Currently,
California and Minnesota prohibit drivers from using suction mounts on
their windshields while operating motor vehicles.
Step 1: Mount the navigation device
Select a suitable location to mount the navigator on your windshield.
Clean and dry the suction cup and the selected area of your windshield .
....
1. Place the suction-cup mount on a suitable
position on the windshield.
2. Push back the lever to the left until you hear
a click, fixing the suction-cup mount in position.
3. Align the docking connector from the suction-cup
~
mount with the unit holder then push the holder
--d
down until you hear a click.
4. Align the unit and holder until you hear a click.
5. Plug the supplied power cable into a cigarette lighter
socket in your vehicle and connect the other end of
the power cable into the power supply connector on
the side of the unit.
Ways to charge the navigation device
• Connect the vehicle power cable to the navigator and to a cigarette
lighter socket in your vehicle .
• Connect the supplied AC adapter to the navigator and a wall outlet.
3