Table of Contents
Advertisement
Turn signals, front
21-watt bulb, PY21W
1.
Switch off the lamps and take the remote
control out of the ignition lock.
2.
Open the folding cover in the wheel arch, re‐
fer to page 247.
3.
Turn the turn signal bulb socket 1 to the left
and remove it.
4.
Apply gentle pressure to the bulb while turn‐
ing it to the left for removal and replacement.
5.
Insert the turn signal bulb socket 1 and turn
it all the way to the right.
6.
Attach the folding cover in the wheel arch.
Turn signal in exterior mirror
Follow the general instructions on lamps and
bulbs, refer to page 246.
The turn signals in the exterior mirrors use LED
technology.
Contact your service center in the event of a
malfunction.
Tail lamps
The tail lamps consist of two parts. One part is
in the tailgate and the other is in the fender.
P21W bulbs, 21 watt
Online Edition for Part no. 01 40 2 914 595 - VI/12
Replacing components
1
Backup lamp
2
Roadside parking lamp/tail lamp LED
3
Brake lamp
4
Turn signal
5
Inner brake lamp
If bulb 2 is defective, please contact the service
center.
Lamps in fender
All bulbs are integrated in a central bulb holder.
1.
Switch off the lamps and take the remote
control out of the ignition lock.
2.
Press the cover out of the rear cargo area
side trim and remove it.
3.
Disengage the bulb holder by pressing
down the upper clip, arrow 1.
Mobility
249
Advertisement
Table of Contents
