Use Your Baby Monitor - Philips AVENT AVENT SCD505 User Manual

5 Use your baby
monitor
Link the parent unit to the baby unit:
1
Press and hold on the baby unit for two
seconds.
» The baby unit turns on, and all
indicators on the baby unit light up
EULHÁ\
2
Press and hold on the parent unit for
two seconds.
» The parent unit turns on, and all
indicators on the parent unit light up
EULHÁ\
» The link LQGLFDWRU ÁDVKHV UHG DQG WKH
parent unit starts to search for the
baby unit.
» When the link is established, the link
indicator lights up green.
» If no link is established, the link
LQGLFDWRU ÁDVKHV UHG 7KH SDUHQW XQLW
beeps from time to time.
Tip
‡
It takes about 15 seconds to establish the link between
the parent unit and the baby unit.
Position the baby monitor:
Note
‡
For the optimal monitoring performance, keep the baby
unit 1 to 2 metres (3.5 to 7 feet) away from the baby.
‡
Place the baby unit away from window or noisy
sources, like a fan, TV, or radio.
‡
The baby unit should always face towards the baby.
1
Keep the baby unit and the power cord at
least 3.5 feet/1 meter away from your baby.
> 3.5ft/1m
2
Keep the parent unit at least 5 feet/1.5
meter away from the baby unit to prevent
acoustic feedback.
> 5ft/1.5m
3
Use the parent unit in the operating range
of the baby unit. Place the parent unit close
by for better sound performance.
Tip
‡
When the parent unit is out of range of the baby
unit, the parent unit beeps from time to time. The link
LQGLFDWRU RQ WKH SDUHQW XQLW ÁDVKHV UHG
EN 11