●
To switch among input signals
The input signal switches each time
When the signal is switched, the active input port name appears at the top right corner of the screen.
Note
• You can skip a specific input signal. For more information,
●
To set input signal selection "Input Selection"
Setting
Auto
Manual
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "Input Selection" from "Tools", and press
3. Select "Auto" or "Manual" with
4. Press
to exit.
Note
• When "Auto" is selected for "Input Selection", the monitor's power saving function works only when all PCs are in
the power saving mode.
is pressed.
ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
ThemonitordetectsonlythePC'ssignalscurrentlydisplayingautomatically.Selectan
activeinputsignalwith
or .
see"3-9. To Disable Input Signal "Input Skip"" (page
Function
.
.
.
28).
39
Chapter6Reference