ProMariner ProSport6 Owner's Manual And Installation Manual page 9

W I R I N G D I A G R A M S
14
Typical Wiring
Fig. 3 ProSport 15 (OEM only) and 20 Three Bank Charger for 3 12V Batteries
Dedicated 36 VDC Trolling Motor Battery Configuration
with (3) 12 VDC Batteries Connected with (2) Series Jumpers
ProSport 20 Plus
For Engine Battery use
this Bank Cable Only
Cable 1
_
Bat 1 Bat 2
+ +
Three 12 VDC Batteries connected with a (2)
series jumper for a 36 VDC Trolling Motor
Note 1: One bank cable connects to no more than one battery
Note 2: ProSport is designed to be used with group 24, 27, 30 and 31 batteries
Cable 3
Cable 2
Top View
_ _
Bat 3
of Battery
+
Typical Wiring
Fig. 4 ProSport 20, 12 and 8 Dual Output Charger for 2 12V Batteries
12 VDC Engine Start and a 12 Volt Trolling Motor or House Battery Configuration
with (2) 12 VDC Batteries
Note:
Indicates Jumper Series
Indicates Fuse
ProSport 12
For Engine Battery use
Cable 1
this Bank Cable Only
_
Bat 1
+
12 VDC Engine
Crank Battery
Note 1: One bank cable connects to no more than one battery
Note 2: ProSport is designed to be used with group 24, 27, 30 and 31 batteries
W I R I N G D I A G R A M S
Cable 2
Top View
_
Bat 2
of Battery
+
12 VDC Trolling
Motor or House Battery
15