Dmx Mode - Ignition LED STUDIO PAR PLATINUM User Manual

1.2. Power Connection
!! CAUTION !!
Never leave this device running unattended!! Every person that is involved with this Item has
to be qualified!!
Connect item with the main plug. The voltage and frequency must exactly be the same as
stated on the device. The power plug must always be inserted without force.
1.3 Cleaning and Maintenance
Please make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
1. Make sure before installing that all screws are tightly connected and not corroded.
2. There must be no deformations on the housings, fixations and installations spots.
3. No damages must be showed on the power supply cables, material fatigue and
sediments.
If the device is going to be cleaned, please use moist, lint free cloths. Never use alcohol or
solvents!!
The cooling fan must be cleaned monthly!
To clean the interior of the device please use a vacuum cleaner or an air jet.
We recommend cleaning the lenses weekly to keep the light output as long as possible.

2. DMX Mode

You are able to work with the fixtures in 3 different modes
DMX Mode – in this Mode its possible to control via DMX Controller .
Program Mode – in thsi mode you can use the built in programs
Speed Mode – in this mode you can adjust the program speed.
Sound Mode – in this mode the fixture reacts to sound impulse.
LED Studio Par Platinum 20x3W PWM
5 / 12