RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use of this product.
Page 5
10. Mechanical and electrical factors need to be considered when installing a professional audio system (in addition to those which are strictly acoustic, such as sound pressure, angles of coverage, frequency response, etc.). 11. Hearing loss Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level that leads to hearing loss is different from person to person and depends on the duration of exposure.
- V218-S subwoofer, 2x15” woofer (4” voice coil) V35 and V45 models are carefully assembled in Italy (in our main factory) and include RCF woofers and drivers that are the best of the most recent technology about transducers.
(4-pole) plugs. ‘FULL RANGE’ MODE The impedance value of V35 is 8 Ω; V45 is 4 Ω Connect the positive wire (amplifier ‘+’ output) to the pin 1+ of the SPEAKON connector. Connect the negative wire (amplifier ‘–’ output) to the pin 1– of the SPEAKON connector.
Page 8
CONNECTIONS V218-S On each rear panel: - A switch to select either ‘PARALLEL’ (one amplifier for two woofers in parallel) or “SINGLE” (one amplifier for one woofer) - 2 sockets (input and output, linked in parallel) for ‘Neutrik Speakon NL4’ (4-pole) plugs.
Need help?
Do you have a question about the V35 and is the answer not in the manual?
Questions and answers