Page 2
No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Leadtek Research Inc. Leadtek makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. The information in this document is subject to change without notice.
Audio input ..................3 Audio output ..................3 VideoPhone BVP 8882 SIP packaging description ....4 What's In The Package ..........5 Getting to Know Your BVP 8882 SIP ......6 Front view ............... 6 LEDs ....................9 Rear view ................. 12 Side view ................
Page 4
System Setup ............... 16 ADSL/Constant ADSL/Single, Public, & Fixed IP ..17 When the IP is used exclusively by BVP 8882 SIP ..... 17 ADSL/Constant ADSL/Multiple, Public, & Fixed IP ..18 When BVP 8882 SIP uses one of the IPs (without a DHCP server connected) ...........
Page 5
Table of Contents Using OSD Menus ............. 31 Password Checking ............31 Configuration ..............32 System Setup ..............32 Network Setup ..............32 SIP Server Setup ............. 33 NTP Server Setup............34 Update Server Setup ............35 STUN Server Setup............36 Service Setup ..............
(OSD), easily control the functions and make adjustments. The BVP 8882 SIP has a built-in high quality CCD camera and an active matrix liquid crystal display. Images are transmitted through the Internet at up to 24 frames per second (fps) (@ CIF resolution). While making a video call, you can enjoy the brilliant real-time color images of yourself, your correspondents or both.
VideoPhone BVP 8882 SIP is ON and in standby mode The " En Service " LED is on permanently. Network unavailability If VideoPhone BVP 8882 SIP of end users is not connected to the network, the LED "En S ervice" (in use) blinks (until the user receives his DHCP address).
The user can adjust the sound volume with " " and " " keys on his VideoPhone BVP 8882 SIP. · The audio is output to the VideoPhone BVP 8882 SIP speaker (or handset depends if the user is using the hands-free function...)
VideoPhone BVP 8882 SIP packaging description The VideoPhone BVP 8882 SIP package includes: VideoPhone BVP 8882 SIP user manual. A BVP 8882 SIP videophone. A wired handset. A power cord & power adaptor. An ethernet cable. An A/V Convertible Cable.
What's In The Package The following is a summary of VideoPhone BVP 8882 SIP accessories: Color: Black Color: Dark Grey Length: 1600mm Handset x 1 Power Adapter x1 Color: Black Color: Black Length: 1830mm Handset Cable x 1 Power Cord x1...
Getting to Know Your BVP 8882 SIP Front view CCD Camera: The input source of local video image, a miniature LCD Screen: built-in CCD camera. Shows the video images of callers. Mic: En Service indicator: Microphone can be used The green LED light is on when instead of handset.
Front view (cont.'d) Cursor Panel When used with OSD menus; it is used to move the cursor up. During a call, it is used for turning the volume of the speaker Used with OSD menus; to pop up phone up. the OSD menu, to enter the sub Used with OSD menus;...
Page 13
To freeze the video image of callers so that the other party can have a clearer display. "Privacy" key (blue): Stop sending caller's image to the other side so the caller will not be seen by the person you talk to. BVP 8882 SIP User's Manual...
- As soon as "Sound privacy" (mute) is on, the LED flickers quickly - When VideoPhone BVP 8882 SIP is off or the ethernet cable is not connected, the LED switches off - When VideoPhone BVP 8882 SIP is not connected to the network (ie.
Page 15
125ms on, and 750ms off, and so on - Incoming call (Video LED): 125ms on, 125ms off, 125ms on, 125ms off and so on - Service unavailability: 1000ms on, 1000ms off, 1000ms on, 1000ms off and so on BVP 8882 SIP User's Manual...
Page 16
Front view (cont.'d) Numeric Keypad 1 to 9 keys In numeric field : only numbers are shown. In alphanumeric field: 1: display 1 and blank space. display A, B, C, 2 . Push "#" to switch to lower case letters. 3: display D, E, F, 3.
360 degrees Handset Jack (To the left) and 90 Handset cable degrees (To the right) connector and tilted forwards and backwards USB port(Metal) The USB interface that provides extension for USB WiFi Ethernet dongle BVP 8882 SIP User's Manual...
Installing the unit Step 1 Pick a good spot Stability Place your BVP 8882 SIP on top of a counter, desk, or table with the CCD camera opening in front. Lighting condition Make sure the lighting is sufficient and does not shine directly into camera lenses.
Page 19
Plug one end of the Ethernet cable in one port of the jacks marked " " on BVP 8882 SIP. Plug the other end of the Ethernet cable in the RJ-45 jack of the Ethernet device (hub, router, or A TU-R).
System Setup The System Setup section gives instructions on how to set up your BVP 8882 SIP system under some mostly used interconnection types. There is a condition bar on each page (as shown in the figure), indicating what type of connection the setup guide on that page is for.
System Setup (Cont'd) Connection ADSL Type Constant ADSL Single, Public, & Fixed When the IP is used exclusively by BVP 8882 SIP Internet BVP 8882 SIP ATU-R BVP 8882 SIP System Setup Network Setup System Setup Configuration SIP Server Setup...
System Setup (Cont'd) Connection ADSL Type Constant ADSL Multiple, Public, & Fixed When BVP 8882 SIP uses one of the IPs (without a DHCP server connected) Internet ATU-R General PC 1, 2, ...n BVP 8882 SIP BVP 8882 SIP System Setup...
System Setup (Cont'd) Connection ADSL Type Timing ADSL Sin gle , Pu blic , & Dyn am ic When the ADSL is used exclusively by BVP 8882 SIP Internet BVP 8882 SIP ATU-R BVP 8882 SIP System Setup Network Setup...
System Setup (Cont'd) Connection Cable Type Single, Public, & Dynamic When the IP is used exclusively by BVP 8882 SIP Internet BVP 8882 SIP Cable modem BVP 8882 SIP System Setup Network Setup System Setup Configuration SIP Server Setup Service Setup...
Firewall Packet Filter With a DHCP server connected Internet Router General PC 1, 2, ...n BVP 8882 SIP DHCP Server BVP 8882 SIP System Setup Network Setup System Setup Configuration SIP Server Setup Service Setup NTP Server Setup Password Bandwidth Setup...
Type Firewall Packet Filter Without a DHCP server connected Internet Router General PC 1, 2, ...n BVP 8882 SIP BVP 8882 SIP System Setup Network Setup System Setup Configuration SIP Server Setup Service Setup Password NTP Server Setup Bandwidth Setup...
General PC 1, 2, ...n BVP 8882 SIP DHCP Server Firewall You can put BVP 8882 SIP into DMZ, or open all ports of BVP 8882 SIP if your router supports this function. BVP 8882 SIP System Setup Network Setup...
Router General PC 1, 2, ...n BVP 8882 SIP Firewall You can put BVP 8882 SIP into DMZ, or open all ports of BVP 8882 SIP if your router supports this function. BVP 8882 SIP System Setup Network Setup System Setup...
General PC 1, 2, ...n BVP 8882 SIP DHCP Server Firewall You can put BVP 8882 SIP into DMZ, or open all ports of BVP 8882 SIP The DHCP if your router supports this function. Server must be able to support dynamic-fixed IP allocation.
Router General PC 1, 2, ...n BVP 8882 SIP Firewall You can put BVP 8882 SIP into DMZ, or open all ports of BVP 8882 SIP if your router supports this function. BVP 8882 SIP System Setup System Setup Network Setup...
0.5 m 0.5 m Make sure of the most appropriate Do not point the BVP 8882 SIP at a lighting source, preferably from the mirror or bright light. front with the beam on your face.
Dialing (local view) Step 5 If there is difficulty in making connection, please make sure that the BVP 8882 SIP has been properly installed. Please also check if the network settings are configured properly. BVP 8882 SIP User's Manual...
Icon explanations When BVP 8882 SIP is powered on, a bootup screen will be displayed, as the figure shown below. There are icons around the screen indicating various statuses of the unit, as explained below. SIP Registration Fail LAN Disconnected...
Page 35
The antenna icon on the lower right corner indicates the connection status. The sun icon means the Ethernet cable is connected to the unit. If the sun icon disappears, it means the Ethernet cable is not connected. BVP 8882 SIP User's Manual...
Using OSD Menus Password Checking : Item selection Configuration Password Phonebook You can enter a combination Please input password: of up to 64 letters (upper case or lower case) and numbers as the password. System Setup Service Setup Bandwidth Setup Remote Update Note: Only after you enter the correct...
There will be a number on the bottom left corner of the screen, indicating the current input mode. Press button to cycle through (numbers), (upper case letters), and (lower case letters) for your desired input mode. BVP 8882 SIP User's Manual...
Protocol (NTP) public time servers. Timer Zone: Please set the time zone according to the place you are using the phone. Daylight savings: If there is daylight saving in your area, please set Daylight savings to ON. BVP 8882 SIP User's Manual...
Using OSD menus Configuration System Setup Update Server Setup Update Server: 61.228.211.13 Protocol: TFTP Port No: Update Server: Please contact your SIP service provider for the appropriate settings. Protocol: For specific protocol of type TFTP/FTP/HTTP, the corresponding port no is 69/21/80.
Using OSD menus Configuration System Setup STUN Server Setup STUN Service : OFF STUN Discover: OFF STUN Server: 0.0.0.0 Port: 3478 STUN (Enabled/Disabled)/Server/Port : Please contact your SIP service provider for the appropriate settings. BVP 8882 SIP User's Manual...
There are twelve options available. We recommend the default setting to be: G.711UA,G.723, G.729. Video: ON: BVP 8882 SIP can be used to make a video call. OFF: BVP 8882 SIP can only be used to make a voice call.
Num. Of Rings: 4 Auto Answer (ON/OFF): ON: BVP 8882 SIP will automatically pick up the phone. Password: If you set Auto Answer to ON but would like to have some security set up, then please enter a Password. The other party has to enter the password in order to establish the connection.
Using OSD menus Configuration Service Setup Advanced Setup QoS Mode( ) Country Tone: Taiwan QoS Mode: QoS Type (DSCP/TOS/OFF): Please contact your ISP (Internet Service Provider) to determine which QoS to use. Country Tone: Taiwan/HK/China: Please set according to where you are using BVP 8882 SIP.
Using OSD menus Configuration Service Setup Ringer Setup Ringer: High Ringer Type: 0 Ringer (High/Low): You can set the volume of the ringer to High or Low. BVP 8882 SIP User's Manual...
ON: In a video call, you can monitor the bandwidth of incoming and outgoing video. Language: English/Traditional Chinese/Simplified Chinese/Japanese: Choose the language for the OSD Menu. Media Detection (ON/OFF): If you plan to keep BVP 8882 SIP connected for a long period of time, please set to OFF.
7. 384 Kbps 8. 512 Kbps Please set the bandwidth according to the bandwidth your ISP provides. Note: Do not set the bandwidth to higher than what your ISP provides to avoid the instability of video quality. BVP 8882 SIP User's Manual...
Update proceeding. Please wait. Note: If BVP 8882 SIP has the same software version as the Update Server, the software will not be updated, and BVP 8882 SIP will return to the standby screen.After the update is completed, BVP 8882 SIP will...
Change Password? mode. Press button to cycle through Yes <OK> (numbers), (upper case letters), and No <CLEAR> (lower case letters) for your desired input mode. Invalid Incorrect Password Check inputs Valid New Password Saving. BVP 8882 SIP User's Manual...
Using OSD menus Phonebook Add Adding to the phonebook : Item selection : Item selection Search Configuration In Box Password Out Box Miss Box Phonebook Speed Dial press **** to clear phonebook : Item selection : move cursor Name: : backspace Phone: There will be a number on the bottom left corner...
Press button to cycle through (numbers), (upper case letters), (lower case letters) for your desired input mode. Dial Name: Edit Phone: Delete 123456 Add to Speed Dial (Continued) BVP 8882 SIP User's Manual...
(numbers), (upper case letters), and (Lower case letters) for your desired input mode. If you cannot dial out with BVP 8882 SIP, please hang up or press button to Record updated return to local view, and try to dial again.
Page 53
0. (None) Delete This Record? 1. (None) 2. (None) Yes <OK> 3. (None) No <CLEAR> 4. (None) : Item selection Press the item number (0-9) to assign the record to the number. Record deleted Record saved BVP 8882 SIP User's Manual...
Using OSD menus Phonebook In Box In Box contains the numbers of the last 30 received calls. : Item selection : Item selection Search Configuration In Box Password Out Box Miss Box Phonebook Speed Dial press **** to clear phonebook From: Phone: Time: From:...
Phone No. Domain Dialing... If you can not dial out with BVP 8882 SIP, please hang up or press Button to return to local view, and try to dial again. BVP 8882 SIP User's Manual...
Using OSD menus Phonebook Miss Box Miss Box contains the numbers of the last 30 missed calls. : Item selection : Item selection Search Configuration In Box Password Out Box Miss Box Phonebook Speed Dial press **** to clear phonebook From: Phone: Time: From:...
**** to clear Speed Dial the current input mode. Press button to cycle through (numbers), (upper case letters), and Name: (lower case letters) for your desired input mode. Phone: 123456 Edit Erase (Continued) BVP 8882 SIP User's Manual...
Page 58
Using OSD menus Phonebook Speed Dial Speed Dial (cont'd) Edit record Erase record : Item selection : Item selection Edit Edit Erase Erase Delete This Record? Name: Yes <OK> Phone: No < Clear > Modify This Record? Record erased Yes <OK> No <...
In local view screen, pressing "0000" will bring out a status screen with some information displayed, including the company name, copyright statement, and software version, including main s/w and LAN s/w. Copyright(C)2001-2006 Leadtek Research Inc. All rights reserved. 0000 VFAST V2.5.00-51 V2.5.00-51 MAC ID 00-30-04-08-93-94 8882_LR Any key BVP 8882 SIP User's Manual...
Using OSD menus Restore Factory Settings In local view screen, pressing "********" (eight asterisks) will bring out a dialog window, asking if you want to restore all settings to factory default (see below). Press to begin the process. Press to cancel. Restore all settings ******** to factory default?
NTP Server Setup Update Server Setup STUN Server Setup Service Setup Call Service Setup Bandwidth Setup Auto Answer Setup Password Remote Update Advanced Setup Ringer Setup Option Phonebook Search In Box Out Box Miss Box Speed Dial BVP 8882 SIP User's Manual...
Trouble Shooting Your BVP 8882 SIP is reliable and easy to use. If you encounter any problem while using this product, please refer to the table below for possible solutions. Power Indicator OFF Video of local view is dark Plug power adapter in the unit.
It will be easier for our staff to answer your question if you know the name of the product. Detailed description of your problem: Please describe in detail all the problems you encountered, including the kind of software and hardware you are using, and the contents of your system files. BVP 8882 SIP User's Manual...
Limited Warranty Leadtek warrants to the original purchaser of this product that it shall be free of defects resulting from workmanship or components for a period of one (1) year from the date of sale. Defects covered by this Limited Warranty shall be corrected either by repair or, at Leadtek's discretion by replacement.
Need help?
Do you have a question about the BVP 8882 SIP and is the answer not in the manual?
Questions and answers