Advertisement
CAUTIONS
• Read entire installation instructions carefully before beginning installation and save these instructions.
• To avoid possible risk of electrical shock and fire, install this light fixture only on Hunter ceiling fan Type
A-Z. Find the fan model number on the fan package or on the nameplate on top of the motor housing.
WARNINGS
• To avoid possible electrical shock, before installing light fixture disconnect power by turning off the
circuit breakers both to the outlet box and to its associated wall switch location. If
you cannot lock the circuit breakers in the off position, securely fasten a prominent
warning device, such as a tag, to the service panel.
• Connect house wiring to the fan before attaching the light fixture to the fan.
• All wiring must be in accordance with national and local electrical codes. If you are
unfamiliar with wiring, you should use a qualified electrician. Professional installation is recommended.
• To reduce the risk of fire or personal injury, allow bulbs and surrounding surfaces to cool to room
temperature before touching or removing them.
This light fixture is for use only on Hunter Ceiling Fans Type A-Z.
This light fixture weighs 4.45 pounds.
This manual contains installation instructions for the following types of fans:
•
Fans With Removable Switch Housing
•
Fans With Non-Removable Switch Housing
•
Fans With Non-Removable Switch Housing and No Center Hole
Preparing to Install the Light Kit
1.
Disconnect power to the ceiling fan by turning off the circuit breakers both to the outlet box and to any associated wall
switch locations.
IMPORTANT: Read all warnings before you begin.
I
O
43506-01 r031407
Advertisement
