Table of Contents
Advertisement
6. DOWNLOAD AND CALIBRATION
C. Test Jig Operation
Switch Number
Switch 1
Switch 2
Switch 3
Switch 4
LED Number
LED 1
LED 2
LED 3
LED 4
Figure 6-3. The top view of Test JIG
Table 6-2. Calibration Equipment List
Power Source
Power Supply
Travel Adaptor
Table 6-3. Calibration Equipment List
Name
ADI-REMOTE
TI-REMOTE
VBAT
PS
Table 6-4. Calibration Equipment List
Name
Power
TA
UART
MON
Description
usually 4.0V
Use TA, name is TA-20G (24pin)
Description
In ON state, phone is awaked. It is used ADI chipset.
In ON state, phone is awaked. It is used TI chipset.
Power is provided for phone from battery
Power is provided for phone from Power supply
Description
Power is provided for Test Jig.
Indicate charging state of the phone battery
Indicate data transfer state through the UART port
Indicate data transfer state through the MON port
- 80 -
Advertisement
Table of Contents
