Table of Contents
Advertisement
10
Install and charge the battery
New batteries are shipped partially charged. Before you start using your device, it is recommended
that you install and charge the battery.
Some batteries perform best after several full charge/discharge cycles. You can charge the battery
in two ways:
•
Connect your device directly to an electrical
outlet using the AC adapter.
When your device is turned off, charging is indicated by a solid amber light on the LED indicator.
When your device is turned on, charging is indicated by a solid amber light on the LED indicator as
well as a charging icon (
After the battery has been fully charged, the LED indicator becomes green and a full battery icon
(
) appears on the Today screen.
To install the battery, remove the battery cover first, and then insert
the battery by aligning the exposed copper part of the battery pack
with the protruding copper conductor which is on the left side of the
battery slot. Insert the left side of the battery first, then gently push
the battery into place, and replace the battery cover.
•
) on the Today screen.
Plug the sync cable to the USB port on
your PC and to the sync connector on your
device.
Advertisement
Table of Contents
