Related Manuals for Girard Products TANKLESS WATER HEATER
Summary of Contents for Girard Products TANKLESS WATER HEATER
- Page 1 GIRARD TANKLESS WATER HEATER TROUBLE-SHOOTING & END USER GUIDE APRIL 6, 2011 OPERATION OVERVIEW OPERATION PROCEDURES FOR THE END USER TROUBLE-SHOOTING TEST PROCEDURES GIRARD PRODUCTS LLC – 866-559-1221 – www.greenrvproducts.com...
-
Page 2: Operation Overview
We have found that most customers have no problem with the function and operation of the Girard Tankless Water Heater after a few tries. However it is important that the personnel explaining the operation to them are comfortable and understand the operation and performance of the Girard Tankless Water Heater. -
Page 3: Operating Procedure
Contact your Girard Dealer or Service Center if you can’t achieve the proper temperatures rises. Since the Girard Tankless Water Heater does not have a tank it does not need to pre-heat and store water to 130 to 140 degrees. Tank water heaters must heat the water hotter since they are trying to make 6, 10 or 12 gallons of Hot water last longer (so you can mix it with cold water to achieve the proper hot water temperature) and allow the end user a few minutes of Useable Hot Water temperatures. -
Page 4: By-Passing The High/Low Sensor
FOR TECHNICIAN USE - NOT FOR END USER USE! IF THE RESULTS IN THE OPERATION ARE NOT SATISFACTORY The Girard Tankless Water Heater burner will automatically adjust from 27,000 BTU to 34,000 BTU depending on the incoming water temperature if the MODE Switch is set in the AUTO position.