Introduction; Functional Description - Scan Antenna Thuraya IP Product Manual And User Manual

Product Manual and User Guide – ThurayaIP Active Antenna

Introduction

1.
Thank you for choosing a product from SCAN Antenna. This product has been carefully
developed with your satisfaction in mind. SCAN Antenna believes in long relationships with its
customers, and we hope that you will find the quality of this product satisfactory.
Contact info for SCAN Antenna:
SCAN Antenna A/S
Dyregårdsvej 1-3
DK-2740 Skovlunde
DENMARK
If your antenna has been purchased through a distributor, please contact your distributor for
support.

2. Functional description

This product,
is designed exclusively for use with a ThurayaIP terminal (model no. 9103, by Hughes Network
Systems). The use of this antenna with any other products is not supported.
This antenna enables the use of the highest streaming IP rates of ThurayaIP, and improves
performance for all other modes.
This antenna also enables the use of long cables between the ThurayaIP terminal and the
antenna.
The antenna consists of a directional antenna, a High-Power Amplifier (HPA) for the uplink, a
Low-Noise Amplifier (LNA) for the downlink, and the necessary power supply circuitry. This
enables the antenna to meet the required satellite link specifications for the ThurayaIP system.
The antenna must have power available (see chapter 7), and the antenna must be pointed
towards the satellite for proper operation.
Version B
ThurayaIP Active Portable Antenna (P/N 62 100)
20. september 2010
SCAN Antenna A/S –
Phone (45) 43 33 16 20
Fax (45) 44 94 10 99
Email info@scan-antenna.com
WWW www.scan-antenna.com
www.scan-antenna.com
Page 5 of 19